User manual

12-19
12.1.17 netbios-node-type
DHCP Config Commands
Use this command to configure the netbios-node type.
Syntax
netbios-node-type [b-node|h-node|m-node|p-node]
Parameters
Example
RFS7000(config-dhcp)#netbios-node-type p-node
RFS7000(config-dhcp)#
netbios-node-type
[b-node | h-node |
m-node | p-node
]
NetBIOS (WINS) name servers.
• b-node – Broadcast node.
• h-node – Hybrid node.
• m-node – Mixed node.
• p-node – Peer-to-peer node.