User manual

Overview
12-14
12.1.12 hardware-address
DHCP Config Commands
Use this command to reserve IP address (manually) based on a DHCP client’s hardware address. Use the no
hardware-address
command to remove this form the DHCP pool.
Syntax
hardware-address [XX-XX-XX-XX-XX-XX | XX:XX:XX:XX:XX:XX]
Parameters
Usage Guidelines
This command accepts only hexadecimal values.
Example
RFS7000(config-dhcp)#hardware-address 00:01:23:45:32:22
RFS7000(config-dhcp)#
hardware-address
[XX-XX-XX-XX-XX-XX |
XX:XX:XX:XX:XX:XX]
Configures the client’s hardware address.
• XX-XX-XX-XX-XX-XX – Dashed-hexadecimal string.
• XX:XX:XX:XX:XX:XX – Dotted-hexadecimal string.