User manual

Overview
12-10
12.1.8 dns-server
DHCP Config Commands
Use this command to configure the DNS server’s IP address available to all the DHCP clients connected to the
pool. Use the
no dns-server command to remove DNSserver list.
Syntax
dns-server <ip address1> <ip address2> <ip address3> .....<ip address8>
Parameters
Usage Guidelines
For DHCP client’s, the DNS server’s IP address is used to map the host name to IP address. The DHCP client
uses the DNS servers IP address based on the order (sequence) it is configured.
Example
RFS7000(config-dhcp)#dns-server 2.2.2.222
RFS7000(config-dhcp)#
dns-server <IP address> Configures the DNS Server’s IP address.
• <IP address> – Server's IP address.