User manual

12-9
12.1.7 default-router
DHCP Config Commands
Use this command to configure the default router or gateway IP address for the network pool. To remove the
default router list, use the
no default-router command.
default-router <Router IP address>
Parameters
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Example
RFS7000(config-dhcp)#default-router 2.2.2.1
RFS7000(config-dhcp)#
default-router
<router IP address>
Specifies the default router IP address for the network pool.
• <router IP address> – Router's IP address.