User manual

Overview
12-4
12.1.2 bootfile
DHCP Config Commands
Use this command to assign a bootfile name for the DHCP configuration on the network pool.
Syntax
bootfile <filename>
Parameters
Usage Guidelines
Use the bootfile command to specify the boot image. The boot file contains the boot image name used for
booting the bootp clients (DHCP clients).
Example
RFS7000(config-dhcp)#bootfile bootexample.txt
RFS7000(config-dhcp)#
bootfile <filename> Indicates the boot image for bootp clients. The file name can contain letters,
numbers, dots and hyphens. Consecutive dots and hyphens are not permitted.