User manual

DHCP Instance
Use the (config-dhcp)instance to configure the DHCP server address pool associated the switch.
12.1 DHCP Config Commands
Table 12.1 summarizes config-std-nacl commands.
Table 12.1 Extended ACL Config Command Summary
Command Description Ref.
address Configures DHCP server include range. page 12-3
bootfile Assigns a boot file name. The bootfile name can contain letters,
numbers, dots and hyphens. Consecutive dots and hyphens are not
permitted.
page 12-4
client-identifier Use an ascii string as a client identifier. page 12-5
client-name Assigns an client name. page 12-6
clrscr Clears the display screen. page 12-7
ddns Configures Dynamic DNS. page 12-8
default-router Configures the default routers IP address. page 12-9
dns-server Configure the IP address for the DNS Server. page 12-10
domain-name Configure the domain name. page 12-11
end Ends the current mode and moves to the EXEC mode. page 12-12