User manual

Overview
10-8
10.1.7 no
Standard ACL Config Commands
Use this command to negate a command or set its defaults.
Syntax
no(deny|mark|permit)
This command negates all the syntax combinations used in deny, mark and permit commands to configure the
Extended ACL.
Parameters
Example
RFS7000(config-std-nacl)#no permit any rule-precedence 10
RFS7000(config-std-nacl)#
RFS7000(config-std-nacl)#no deny any rule-precedence 20
RFS7000(config-std-nacl)#
RFS7000(config-std-nacl)#no mark tos 4 192.168.2.0/24 rule-precedence 30
RFS7000(config-std-nacl)#
deny Specifies packets to reject.
mark Specifies packets to mark.
permit Specifies packets to forward.