User manual

6-13
6.1.11 rsakeypair
Trustpoint Config commands
Use this command to configure a RSA Keypair to associate with the trustpoint.
Syntax
rsakeypair
Parameters
Usage Guidelines
Use RSA Key Pair support to configure the switch to have Rivest, Shamir, and Adelman (RSA) key pairs. The
switch software can maintain a different key pair for each identity certificate.
Example
RFS7000(config-trustpoint)#rsakeypair were
RFS7000(config-trustpoint)#
The rsakeypair name were in this example is an exisitng keypair value.
WORD RSA keypair identifier.