User manual

crypto-trustpoint Instance
Use config-crypto-trustpoint commands to define a Certificate Authority (CA) trustpoint.
config-crypto-trustpoint is a seperate instance, belonging to the crypto pki trustpoint mode under
the
config instance.
6.1 Trustpoint Config commands
Table 6.1 summarizes the config-crypto-trustpoint commands.
Table 6.1 Trustpoint Config Commands Summary
Command Description Ref.
clrscr Clears the display screen. page 6-3
company-name Company name (applicable only for request). page 6-4
email Email. page 6-5
end Ends the current mode and moves to the EXEC mode. page 6-6
exit Ends the current mode and moves to the previous mode. page 6-7
fqdn Domain name configuration. page 6-8
help Describes the interactive help system. page 6-9
ip-address Internet Protocol (IP). page 6-10
no Negates a command or set defaults. page 6-11