User manual

5-49
snmp-server enable traps wireless-statistics wlan
(avg-bit-speed-less-than|avg-retry-greater-than|avg-signal-less-than|
gave-up-percent-greater-than|nu-percent-greater-than|
num-mobile-units-greater-than|pktsps-greater-than|tput-greater-than|
undecrypt-percent-greater-than)
snmp-server host <host IP address>(v2c<1-65535>|v3<1-65535>)
snmp-server location (LINE)
snmp-server manager(all|v2|v3)
snmp-server sysname
snmp-server user(snmpmanager|snmpoperator|snmptrap)
snmp-server user (snmpmanager|snmpoperator|snmptrap) v3(auth|encrypted)
snmp-server user (snmpmanager|snmpoperator|snmptrap) v3
auth (md5<password>)
snmp-server user (snmpmanager|snmpoperator|snmptrap) v3
encrypted (auth|des)(md5<password>)
Parameters
(community) Sets the community string and access privileges.
ro Read-only access with this community string.
rw Read-write access with this community string.
contact Text for MIB object sysContact.
LINE Contact person for this managed node.
enable traps ( ) Enables SNMP traps.
• all – Enable all traps.
• dhcp-server – Enable dhcp-server traps.
• miscellaneous – Enable miscellaneous traps.
• mobility – Enable mobility traps.
• nsm – Enable nsm traps.
• radius-server – Enable radius-server traps.
• redundancy – Enable redundancy traps.
• snmp – Enable SNMP traps.
• wireless – Enable wireless traps.
• wireless-statistics – Modify wireless-stats rate traps.
all Enables all traps.
dhcp-server ( ) Enables dhcp-server traps.
• dhcpServerDown – DHCP server down.
• dhcpServerUp – DHCP server up.