User manual

Overview
5-32
5.1.19 logging
Global Configuration Commands
Use this command to modify message logging facilities.
Syntax
logging(aggregation-time|buffered|console|facility|host|monitor|on|syslog)
logging aggregation-time(<1-20>)
logging buffered(<0-7>|alerts|critical|debugging|emergencies|errors|
informational|notifications|warnings)
Parameters
aggregation-time Sets number of seconds (between 1 - 120) for aggregating repeated messages.
buffered Sets the buffered logging level.
console Sets the console logging level.
monitor Sets the terminal line logging level.
syslog Sets the syslog servers logging level.
<0-7> Enters the logging severity level (between 0 - 7)
alerts Immediate action needed, (severity=1).
critical Critical conditions, (severity=2).
debugging Debugging messages, (severity=7).
emergencies System is unusable, (severity=0).
errors Error conditions, (severity=3).
informational Informational messages, (severity=6).
notifications Normal but significant conditions, (severity=5).
warnings Warning conditions, (severity=4).
facility Syslog facility in which log messages are sent.
local0 Syslog facility local0.
local1 Syslog facility local1.
local2 Syslog facility local2
local3 Syslog facility local3.
local4 Syslog facility local4.
local5 Syslog facility local5.
local6 Syslog facility local6.
local7 Syslog facility local7.