User manual

5-27
Parameters
access-list Use the access list parameter to enter the ext-nacl context and std-nacl
context. The prompt changes to the context entered.
For additional information, see Extended ACL Instance on page 9-1 (for extended
ACLs) and Standard ACL Instance on page 10-1 (for standard ACLs).
default-gateway Configures the default gateway.
A.B.C.D IP gateway address.
dhcp DHCP Server configuration.
bootp BOOTP specific configuration.
ignore Configures the DHCP Server to ignore BOOTP requests.
excluded-address Prevents the DHCP Server from assigning certain addresses.
A.B.C.D Low IP Address.
option Defines the DHCP server option name.
ping Specifies the ping parameters used by DHCP server.
timeout Specifies a ping timeout between 1-10 seconds.
pool Configures the DHCP Server address pool.
restart Restart DHCP Server to get the DHCP config changes into effect.
domain-lookup Enables the Domain Name Service (DNS).
domain-name Sets default domain for DNS.
http Hyper Text Transfer Protocol (HTTP).
secure-server Secure HTTP server (HTTPS).
secure-trustpoint Enter the name of the trustpoint to be used for secure connection.
server HTTP server.
localhost Used only to serve requests from localhost.
local vpn local ip pool configuration.
pool Address pool.
default
low-ip-address
A.B.C.D Internet Protocol.
name-server Adds a nameserver to the DNS.
A.B.C.D IP address of Nameserver to add.
nat Network Address Translation (NAT).