User manual

5-25
5.1.15 interface
Global Configuration Commands
Use this command configure a selected interface.
Syntax
interface(IFNAME|fe|ge <1-4>|sa <1-4>|tunnel <1-32>|vlan <1-4094>)
Parameters
Example
RFS7000(config)#interface me1
RFS7000(config-if)#
RFS7000(config)#interface ge 3
RFS7000(config-if)#
RFS7000(config)#interface sa 2
RFS7000(config-if)#
RFS7000(config)#interface tunnel 27
RFS7000(config-if)#
RFS7000(config)#interface vlan 400
RFS7000(config-if)#
NOTE The interface mode leads to the config-if instance. For additional information,
see interface Instance on page 7-1.
The prompt changes from
RFS7000(config) # to RFS7000(config-if)
IFNAME Interface name.
ge <1-4> GigabitEthernet interface. Select an index value between 1 - 4.
me1 FastEthernet interface.
sa <1- 4> StaticAggregate interface. Select an index value between 1 - 4.
tunnel <1-32> Tunnel interface. Select an index value between 1 - 32.
vlan <1-4092> VLAN interface. Select an index value between 1 - 4092.