User manual

5-23
5.1.13 ftp
Global Configuration Commands
Use this command to configure the switch as an FTP server.
Syntax
ftp enable
ftp password(0|1|LINE)
ftp rootdir(DIR)
Parameters
Example
RFS7000(config)#ftp enable
RFS7000(config)#
enable Enables FTP server.
password Configures a FTP password. Set the password using one of the folllowing:
• 0 — Password is specified UNENCRYPTED.
• 1 — Password is encrypted with SHA1 algorithm.
• LINE — Password.
rootdir Configures the FTP root dir. Set the ROOT directory location of the FTP server
using:
• DIR — Sets root dir of the ftp server.