User manual

5-19
5.1.9 debug
Global Configuration Commands
Use this command to turn on and off mstp debugging messages.
Syntax
debug (mstp) [all|cli|packet(rx |tx)|protocol (detail)|timer(detail)]
Parameters
Example
RFS7000(config)#debug mstp all
RFS7000(config)#
RFS7000(config)#debug mstp cli
RFS7000(config)#
RFS7000(config)#debug mstp packet rx
RFS7000(config)#
RFS7000(config)#debug mstp protocol detail
RFS7000(config)#
RFS7000(config)#debug mstp timer detail
RFS7000(config)#
all Echoes all MSTP debugging levels to the console.
cli Echoes all MSTP debugging levels to the console.
packet Echoes MSTP packets (received and transmitted) to the console.
protocol (detail) Echoes protocol changes to the console.
• detail – Detailed output.
timer (detail) Echoes timer start to the console.
• detail – Detailed output.