User manual

5-11
5.1.3 autoinstall
Global Configuration Commands
Use this command to autoinstall the switch image.
Syntax
autoinstall [clear-config-history|cluster-config|config|image|start]
autoinstall (cluster-config|config|image) (URL[tftp|ftp|http|cf])
autoinstall image version <number>
Parameters
Example
RFS7000(config)#autoinstall clear-config-history
RFS7000(config)#
clear-config-history Autoinstalls a clear configuration history, resulting in a reversion.
cluster-config Autoinstalls a cluster-config setup.
config Autoinstalls a config setup.
image <version number> Autoinstalls the image setup.
• Version number – the version number cannot be the same as the currently
installed version number. Attempting to install the same version results
in an unsuccesfull download.
start Starts the autoinstall sequence.