User manual

3-11
3.1.9 show
User Exec Commands
Use this command to exit the current mode and go down to previous mode.
Syntax
show
Parameters
autoinstall Displays the autoinstall configuration.
banner Displays the “Message of the Day Login” banner.
commands Displays command lists.
debugging Displays debugging information outputs.
history Displays the session command history.
interfaces Displays interface status.
ip Displays the Internet Protocol (IP).
ldap Displays LDAP server details.
licenses Displays any installed licenses details.
logging Displays logging configuration and buffer information.
mac Displays MAC access-list assignment.
management Displays L3 Managment Interface name.
mobility Displays mobility parameters.
ntp Displays the network time protocol.
privilege Displaysthe current privilege level.
radius Displays RADIUS configuration commands.
redundancy-group Displays redundancy group parameters.
redundancy-history Displays the state transition history of the switch.
redundancy-members Displays redundancy group members in detail.
snmp Displays SNMP engine parameters.
snmp-server Displays SNMP Server parameters.
spanning-tree Displays spanning-tree information.
static-channel-group Displays static channel group membership.
terminal Displays terminal configuration parameters.
timezone Displays timezone.
users Displays information about terminal lines.