User manual

3-5
3.1.3 debug
User Exec Commands
Use this command to debug the switch.
Syntax
debug (certmgr(all|err|info)|
ip(https|ssh)|
mobility(cc|error|forwarding|mu|packet|peer|system)|
mstp(all|cli|packet(rx|tx)|protocol (detail)|timer (detail))
Parameters
Example
RFS7000>debug certmgr all
RFS7000>
RFS7000>debug certmgr error
RFS7000>
RFS7000>debug certmgr info
RFS7000>
RFS7000>debug mstp all
RFS7000>
RFS7000>debug mstp cli
RFS7000>
certmgr Certificate manager debugging messages.
ip ( ) Internet Protocol (IP).
• https – Secure HTTP (HTTPS) server.
• ssh – Secured SHell (SSH) server.
mobility ( ) L3 Mobility
• cc – ccserver events.
• error – Error.
• forwarding – Dataplane forwarding.
• mu – MU events and state changes.
• packet – Control packets.
• peer – Peer establishment.
• system – System events.
mstp ( ) Turn on/off mstp debugging messages.
• all – Debugs the entire MSTP.
• cli – Debugs all the MSTP CLI commands.
• packet – Debugs MSTP packets.
• protocol – Debugs MSTP protocols.
• timer – Debugs the MSTP timer.