Installation guide

Motorola WS5100 Wireless Switch and RFS7000 RF Switch Security Target
Page 36 of 85
5.3.1.11 FIA_UID.1 Timing of identification
FIA_UID.1.1 The TOE IT environment TSF shall allow [no actions] on behalf of the TOE remote
user to be performed before the user is identified.
FIA_UID.1.2 The TOE IT environment TSF shall require each TOE remote user to identify itself
before allowing any other IT environment or TSF-mediated actions on behalf of that TOE remote
user.
Application Note: This requirement does not refer to management and control packets that must be allowed to
pass between the wlan client and the access system before authentication. It is assumed that this information
is not user specific and therefore not covered by this requirement.
5.3.1.12 FMT_SMF.1(4) Specification of management functions (user identification and
authentication)
FMT_SMF.1.1(1) The TOE IT environment TSF shall be capable of performing the following
security management functions: [configure user identification and authentication].
5.3.1.13 FMT_SMF.1(5) Specification of management functions (time stamps)
FMT_SMF.1.1(2) The TOE IT environment TSF shall be capable of performing the following
security management functions: [configure time stamps].
5.3.1.14 FMT_MOF.1(4) Management of security functions behavior
FMT_MOF.1.1(4) The TOE IT environment TSF shall restrict the ability to determine the behavior
of the functions: [
• Audit,
• Remote Authentication
• Time service]
to [the administrator].
Application Note: The TOE IT environment must be managed in conjunction with the TOE.
5.3.1.15 FMT_MTD.1(3) Management of identification data (user)
FMT_MTD.1.1(3) The TOE IT environment TSF shall restrict the ability to query, modify, delete,
clear, [create] the [user identification credentials] to [administrators].
5.3.1.16 FMT_MTD.1(4) Management of authentication data (user)
FMT_MTD.1.1(4) The TOE IT environment TSF shall restrict the ability to modify the [user
authentication credentials] to [administrators].