Installation guide

Network Setup
4-12
VLAN details display within the VLANs by Port tab.
3. Refer to the following information as displayed within the VLANs by Port tab:
4. Select an Ethernet port and click the Edit button to revise the current mapping. For more information
on editing VLAN by Port assignments and designations, see
Editing a VLAN by Port Designation on page 4-12.
4.3.2.1 Editing a VLAN by Port Designation
Use the VLAN by Ports Edit facility to modify the port designations available for the selected VLAN. To edit
existing VLAN by Port information:
1. Select Network > Layer 2 Virtual LANs from the main menu tree.
2. Select the Ports by VLAN tab.
VLAN Displays the name of each VLAN configured on the switch.
ge# The VLAN and
ge columns display the VLAN association status of
each VLAN on the switch. If a VLAN is associated with a ge port,
the column displays a green checkmark. If the ge port is not
associated with the VLAN, the column displays a red X mark.