Installation guide

Network Setup
4-10
2. Select a record from the table and click the Edit button to modify the record. For more information,
see Editing the Details of an Existing VLAN on page 4-10.
4.3.1.1 Editing the Details of an Existing VLAN
To revise the configuration of an existing VLAN:
1. Select Network > Virtual LANs from the main menu tree.
2. Select an Ethernet interface and click the Edit button.
The system prompts you with a Port VLAN Change Warning message stating communication
disruptions could occur with the switch.
3. Click OK to continue.
4. Use the Edit screen to modify the VLAN’s mode, access VLAN and allowed VLAN designation.
Mode It can be either Access or Trunk.
• Access– This ethernet interface accepts packets only form
the native VLANs.
• Trunk–The Ethernet interface allows packets from the given
list of VLANs you add to the trunk.
Native VLAN Displays the tag assigned to the native VLAN.
Allowed VLANs Displays VLAN tags allowed on this interface.