Installation guide

Network Setup
4-6
2. Select the Domain Look Up checkbox to enable the switch to query domain name servers to resolve
domain names to IP addresses.
3. Enter a Domain Name in the text field. This is the switch’s domain.
4. Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong with the transaction between the applet and the switch.
5. Click OK to use the changes to the running configuration and close the dialog.
6. Click Cancel to close the dialog without committing updates to the running configuration.
4.2.2 Configuring IP Forwarding
The IP Forwarding table lists all the routing entries to route packets to a specific destination. To view the IP
forwarding details:
1. Select Network > Internet Protocol from the main tree menu.
2. Select the IP Forwarding tab.
Use the Filtering Option to view the details displayed in the table.
3. The read-only IP Forwarding tab displays the current status between VLANs. To toggle the status
between VLANs, use the Enable/Disable options located at the bottom of the screen.
The following details display in the table:
NOTE The look up order is determined by the order of the servers within Domain Name
System tab. The first server queried is the first server displayed.
Destination Subnet Displays the mask used for destination subnet entries. The Subnet
Mask is the IP used to divide internet addresses into blocks (known
as subnets). A value of 255.255.255.0 will support 256 IP
addresses.