Installation guide

Switch Information
3-33
1. Select Switch > Alarm Log from the main menu tree.
2. Select either of the two available filter options to view alarm log information:
3. Refer to the table within the Alarm Log screen for the following information:
View By Page Select the View By Page radio button to view alarm log
information on a per page basis. Use the View By Page option to
display alarm logs in pages. If there are a large number of alarms,
the user can navigate to the page that has been completely loaded.
All operations can be performed on the currently loaded data. Enter
a page number next to “Page” and click the
Go button to move to
the specific page.
View All Select the View All radio button to display the complete alarm log
with in the table. If there are a large number of alarms, the View
All option will take several minutes to load.
Index Displays the unique numerical identifier for trap events (alarms)
generated in the system. Use the index to help differentiate an
alarm from others with similar attributes.
Status Displays the unacknowledged or acknowledged state of each
alarm.
Time Stamp Displays the date, year and time the alarm was raised (as well as
the time zone of the system). The time stamp only states the time
the alarm was generated, not the time it was acknowledged.