Installation guide

Switch Information
3-30
4. Select CF, USB1 or USB2 and click the Format button (enabled only if the CF or USB are connected to
the switch) to check if the memory device is formatted and available. You will be prompted that
proceeding will erase all data on the disk and if you would like to proceed.
3.6 Configuring Automatic Updates
Use the Automatic Updates screen to enable a facility that will poll a server address (you designate) when
the switch is booted. If updates are found since the last time the switch was booted, the updated version is
uploaded to the switch the next time the switch is booted. Enable this option for either the firmware,
configuration file or cluster configuration file. Motorola recommends leaving this setting disabled if a review
of a new file is required before it is automatically uploaded by the switch.
To enable and configure the automatic update feature for switch firmware, configuration files and cluster
configurations:
1. Select Switch > Automatic Update from the main menu tree.
Formatted This displays the format status of the memory devices. This
ensures that the external and internal memory device store the
files securely. A formatted memory device is less prone to crash
and loss of data.
• A green tick mark indicates the device is currently
connected to the switch and is available.
• A red cross mark indicates the device is currently not
available.