Installation guide

Switch Information
3-27
3.5.1.2 Transferring a file from a Wireless Switch to a Server
To transfer a file from the switch to a Server:
1. Refer to the Source field to specify the source file. Use the From drop-down menu and select
Wireless Switch.
2. Use the Browse button and select a file for transfer.
3. Use the To drop-down menu (within the Target field) and select Server. This defines the transfer
location of the configuration file. Enter the file location marked to store the transferred file.
4. Use the Using drop down-menu to configure whether the log file transfer is conducted using FTP,
TFTP, HTTP or SFTP. This field display the default port for FTP,TFTP, HTTP or SFTP. The value in this field
can be configured as required. Enter the IP Address of the server receiving the source configuration.
Ensure the IP address is valid or risk jeopardizing the success of the file transfer. Enter the User ID
credentials required to transfer the configuration file from a FTP server.
5. Enter the Password required to send the configuration file from an FTP server.
6. Specify the appropriate Path name to the target directory on the server. The target options are
different depending on the target selected.
7. Click the Transfer button to complete the file transfer. The Message section in the main menu area
displays the file transfer message.
8. Click Abort at any time during the transfer process to abort the file transfer.
3.5.1.3 Transferring a file from a Server to a Wireless Switch
To transfer a file from a Server to the switch:
1. Refer to the Source field to specify the details of the source file. Use the From drop-down menu and
select Server.