Installation guide

Switch Information
3-24
a. Use FTP to get the firmware update from a File Transfer Protocol (FTP) server. A user account must
be established on the FTP server specified for the firmware update.
b. Use TFTP to get the firmware update from a Trivial File Transfer Protocol (TFTP) server.
6. Enter the IP address for the FTP or TFTP server in the IP address field.
7. Enter the username for FTP server login in the User ID field.
8. Enter the password for FTP server login in the Password field.
9. Enter the complete file path for the file that contains the firmware update in the Path field.
10. Click the Do Update button to initiate the update.
A warning prompt displays. Upon confirming the firmware update, the switch completes the firmware
update.
11. Refer to the Status field for the current state of the requests made from the applet. Requests are any
“SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
12. Click Close to close the dialog without committing updates to the running configuration.
CAUTION When restarting or rebooting the switch, the Radius server is restarted
regardless of its state before the reboot.
!