Installation guide

Switch Information
3-20
4. Refer to the Status field for the current state of the requests made from the applet. Requests are any
“SET/GET” operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
5. Click the Transfer button when ready to move the target file to the specified location. Repeat the
process as necessary to move each desired configuration file to the specified location.
6. Click the Abort button to cancel the file transfer process before it is complete.
7. Click the Close button to exit the Transfer screen and return to the Config Files screen. Once a file is
transferred, there is nothing else to be saved within the Transfer screen.
File Browser (icon) If the target specified is Wireless Switch, click the File Browser
icon to specify the target file’s location on the switch. The target
location can be any of the three file systems on the switch: Flash,
System or NVRAM. In addition to the three built-in file systems
additional targets are CF, for Compact Flash and USB1 and USB2 for
USB flash memory drives. The CF, USB1 and USB2 options are only
available when Compact Flash or USB flash memory cards are
plugged into the switch. For additional information on installing
Compact Flash cards or USB flash memory drives, refer to the
switch installation guide.