Installation guide

Switch Information
3-19
To transfer the contents of a configuration file:
1. Click the Transfer Files button on the bottom of the Configuration screen.
2. Refer to the Source field to define the location and address information for the source config file.
3. Refer to the Target field to specify the details of the target file.
From Select the location representing the source file’s current location
using the From drop-down menu. Options include Server, Local
Disk and Wireless Switch.
File Specify a source file for the file transfer. If the switch is selected,
the file used at startup automatically displays within the File
parameter.
Using Use the Using drop down-menu to configure whether the log file
transfer is conducted using FTP or TFTP. FTP transfers require a valid
user ID and password.
Port Specify the Port number used for the configuration file transfer.
The default port number for FTP transfers in 21, and the default port
for TFTP transfers is 69.
IP Address Enter the IP Address of the server or system receiving the source
configuration. Ensure the IP address is valid or risk jeopardizing the
success of the file transfer.
User ID Enter the User ID credentials required to transfer the configuration
file from a FTP server.
Password Enter the Password required to send the configuration file from an
FTP server.
Path Specify the appropriate Path name to the target directory on the
local system disk or server. The Target options are different
depending on the target selected.
To Use the To drop-down menu to define the location of the
configuration file. Options include the Wireless Switch (default
location), Server (only available when source is Wireless Switch) or
Local Disk (only available when source is Wireless Switch).
File Use the File field to specify a target file for the file transfer. Use
the File Browser icon to search attached files systems for target file
location.