Installation guide

Switch Information
3-11
Read-only details about the port’s cabling connection also display within the Edit screen. This
information should be used to help assess what configuration should be set for this port.
5. Click the OK button to commit the changes made to the port configurations.
6. Click Cancel to disregard any changes and revert back to the last saved configuration.
3.2.2 Viewing the Ports Runtime Status
The Runtime tab displays the read-only runtime configuration for uplink and downlink ports.
To view the runtime configuration details of the uplink and downlink ports:
1. Select Switch > Port from the main menu tree.
2. Select the Runtime tab to display the following read-only information:
Medium Displays the current (read-only) connection medium used by this
port.
Name Displays the port name for which the remaining data represents.
MAC Address Displays the port’s MAC Address. This value is read-only, set at the
factory and cannot be modified.
Oper Status Displays the operational status of the port. The port status can be
either Up or Down.
Speed Displays the current speed of the data transmitted and received
over the port.
Duplex Displays the port as either half or full duplex.