Installation guide

Switch Information
3-8
6. Refer to the Errors field for the following read-only packet error and loss information for associated
access ports and radios:
3.2 Viewing Switch Port Information
The Port screen displays the configuration, runtime status and statistics of Ethernet Port 1 and Ethernet port
2. The Port screen consists of the following tabs:
• Configuration
•Runtime
•Statistics
3.2.1 Viewing the Port Configuration
The Configuration tab displays the current configuration of the switch ports. Use this information to
determine whether an existing port configuration can be used as is, or requires modification to be valid within
the switch managed network.
To view configuration details for the uplink and downlink ports:
1. Select Switch > Port from the main menu tree.
Average Noise Displays the average RF noise for all MUs associated with the
selected WLAN. MU noise for the last 30 seconds is displayed in
black and the number in blue represents MU noise for the last hour.
Average SNR (dB) Displays the average Signal to Noise Ratio (SNR) for all MUs
associated with the switch. The Signal to Noise Ratio is an
indication of overall RF performance on your wireless network.
Average Number of
Retries
Displays the average number of retries for all MUs associated with
the switch. The number in black represents average retries for the
last 30 seconds and the number in blue represents average retries
for the last hour.
% Gave Up Pkts Displays the percentage of packets which the switch gave up on for
all MUs associated with the switch. The number in black
represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
% Non-decryptable
Pkts
Displays the percentage of undecryptable packets for all MUs
associated with the switch. The number in black represents
undecryptable pkts for the last 30 seconds and the number in blue
represents undecryptable pkts for the last hour.