Installation guide

Switch Information
3-7
2. Click the Switch Statistics tab at the top of the Switch screen.
3. Refer to the following read-only information about associated MUs:
4. Refer to the Traffic field for read-only network traffic information for associated APs and radios:
5. The RF Status field displays the following read-only RF radio signal information for associated APs
and radios:
Number of MUs
Associated
Displays the total number of MUs currently associated to the
switch.
Number of APs
Adopted
Displays the total number of access ports currently adopted by the
switch.
Number of Radios
Adopted
Displays the total number of radios currently adopted by the
switch.
Pkts per second Displays the packet transmission rate for received and transmitted
packets over last 30 seconds and 1 hour.
Throughput Displays the traffic throughput for packets received, packets
transmitted and total packets over last 30 seconds and 1 hour. The
throughput value can help identify network bandwidth and
utilization issues negatively impacting performance.
Avg. Bit Speed Displays the average bit speed for the switch over last 30 seconds
and 1 hour. Use the average bit speed to help determine overall
network speeds and troubleshoot network congestion.
% Non-unicast pkts Displays the percentage of non-unicast packets detected (received
& transmitted) by the switch over last 30 seconds and 1 hour. Non-
unicast traffic includes both multicast and broadcast traffic.
Average Signal Displays the average signal strength for MUs associated with the
switch over the last 30 seconds and 1 hour.