Installation guide

Switch Information
This chapter describes the Switch main menu information used to configure the RFS7000. This chapter consists
of the following sections:
• Viewing the Switch Interface
• Viewing Switch Port Information
• Viewing Switch Configurations
• Viewing Switch Firmware Information
• Switch File Management
• Configuring Automatic Updates
• Viewing the Switch Alarm Log
• Viewing Switch Licenses
• How to use the Filter Option
3.1 Viewing the Switch Interface
The Switch Configuration tab provides high-level system, switch name and address information accessible
from one location. Use this information to assess whether the current firmware version is the most recent and
if the number of licenses available is correct to support the number of radio devices deployed. The values
displayed within the screen can be defined in numerous additional locations throughout the switch applet.
NOTE HTTPS must be enabled to access the switch applet. Ensure HTTPS access has
been enabled before using the login screen to access the switch applet.