Installation guide

Switch Management
7-29
5. Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the switch.
6. Click on OK to complete the addition of the Radius Server.
7. Click Cancel to revert back to the last saved configuration without saving any of your changes.
Time to wait for
Radius Server to reply
Define the maximum time (in seconds) the switch waits for the
Radius Server’s acknowledgment of authentication request
packets before the switch times out of the session. The
configurable range is between 1 - 1000 seconds.
Encryption key shared
with Radius Server
Enter the encryption key the switch and Radius Server share and
must validate before the user based authentication provided by the
Radius Server can be initiated.