Installation guide

Switch Management
7-13
5. Click the Expand All Items button to display the sub-items within each trap category. Use this item
to display every trap that can be enabled.
Once expanded, traps can then be enabled by trap category or individually within each trap category.
6. Highlight a specific trap and click the Enable button to enable this specific trap as an active SNMP
trap.
The items previously disabled (with an "X" to the left) now display with a check to the left of it.
7. Highlight a specific trap and click the Disable button to disable the item as an active SNMP trap.
The items previously enabled (with a check to the left) now display with an "X" to the left of it.
8. Highlight a sub-menu header (such as Redundancy or Update Server) and click the Enable all sub-
items button to enable the item as an active SNMP trap.
Those sub-items previously disabled (with an "X" to the left) now display with a check to the left of
them. Once the Apply button is clicked, the selected items are now active SNMP traps on the system.
9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the Disable all sub-items
button to disable the item as an active SNMP trap.
Those sub-items previously enabled (with a check to the left) now display with an "X" to the left of
them.
10. Click Apply to save the trap configurations enabled using the Enable or Enable all sub-items options.
11. Click Revert to discard any updates and revert back to its last saved configuration.
7.4.2 Configuring Trap Thresholds
Use the Wireless Statistics Thresholds screen to modify existing threshold conditions values for individual
trap descriptions. Refer to the greater than, less than and worse than conditions to interpret how the values
should be defined. Additionally, the Unit of threshold Values increment should be referenced to interpret the
unit of measurement used.
To configure SNMP trap threshold values:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
Wireless Displays the list of sub-items (trap options) specific to Wireless
configuration. These include traps specific to wireless
interoperability between the switch and its associated devices.
Select an individual trap and click the Enable button to enable a
specific trap or highlight the Wireless trap family parent item and
click Enable all sub-items to enable all traps within the Wireless
category.