Installation guide

Switch Management
7-12
Redundancy Displays a list of sub-items (trap options) specific to the
Redundancy (clustering) configuration option. Select an individual
trap within this subsection and click the Enable button to enable
this specific trap or highlight the trap family parent item and click
Enable all sub-items to enable all traps within the Cluster
category.
Miscellaneous Displays a list of sub-items (trap options) specific to the
Miscellaneous configuration option (traps that do not fit in any
other existing category). Select an individual trap within this
subsection and click the Enable button to enable this specific trap
or highlight the Miscellaneous trap family parent item and click
Enable all sub-items to enable all traps within the
Miscellaneous category.
NSM Displays a list of sub-items (trap options) specific to the NSM
configuration option. Select an individual trap within this
subsection and click the Enable button to enable this specific trap
or highlight the NSM trap family parent item and click Enable all
sub-items to enable all traps within the NSM category.
Mobility Displays a list of sub-items (trap options) specific to the Mobility
configuration option. Select an individual trap within this
subsection and click the Enable button to enable this specific trap
or highlight the Mobility trap family parent item and click Enable
all sub-items to enable all traps within the Mobility category.
DHCP Displays a list of sub-items (trap options) specific to the DHCP
configuration option. Select an individual trap within this
subsection and click the Enable button to enable this specific trap
or highlight the DHCP trap family parent item and click Enable all
sub-items to enable all traps within the DHCP category.
Radius Displays a list of sub-items (trap options) specific to the Radius
configuration option. Select an individual trap within this
subsection and click the Enable button to enable this specific trap
or highlight the Radius trap family parent item and click Enable all
sub-items to enable all traps within the Radius category.
SNMP Displays a list of sub-items (trap options) specific to the SNMP
configuration option. Select an individual trap within this
subsection and click the Enable button to enable this specific trap
or highlight the SNMP trap family parent item and click Enable all
sub-items to enable all traps within the SNMP category.
Diagnostics Displays a list of sub-items (trap options) specific to the
Diagnostics configuration option. Select an individual trap within
this subsection and click the Enable button to enable this specific
trap or highlight the Diagnostics trap family parent item and click
Enable all sub-items to enable all traps within the Diagnostics
category.