Installation guide

Switch Management
7-2
7.1 Displaying the Management Access Interface
Refer to the main Management Access interface for a high-level overview of the current switch firmware
version and the current switch log output configuration. Use this information to discern whether a switch
firmware upgrade is required (by checking the Website for a newer version) and if the switch is outputting log
data appropriately.
To display the main Management screen:
1. Select Management Access from the main menu tree.
2. Refer to the Current Status field to review the following read-only information:
NOTE When the switch’s configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen’s
Status field and the screen remains displayed. In the case of file transfer
operations, the transfer screen remains open during the transfer operation and
remains open upon completion (with status displayed within the Status field).
Firmware In Use The Firmware In Use value displays the software version
currently running on the switch. Use this information to assess
whether a firmware update would improve the switch feature set
and functionality.
Log Output The Log Output value displays the target location for log files
output by the switch.
NOTE The Apply and Revert functions are greyed out within the Management Access
screen, as this screen is has no configurable parameters for the user to update and
save.