Installation guide

Switch Security
6-99
9. Click Apply to save changes to the screen. Navigating away from the screen without clicking the
Apply button results in changes being discarded.
10. Click the Revert button to undo the changes to the screen and revert to the last saved configuration.
6.11.2 Configuring the Probe Table
Define enhanced probes to detect rogue MUs within the network. An AP300 transmits beacons and the MUs
sends a probe request to the AP for association. An AP300 (on receipt of the probe request) sends a probe
response and associates to the MU.
When using an enhanced probe, an AP300 sends a probe response to the MU to associate. At the same time,
the AP forwards the MU’s probe request information to the switch. The switch maintains a table of the probe
requests the AP300 receives from MUs. In conjunction with the Motorola RF Management application, the AP
locates the rogue MU and displays its location within a Motorola RFMS maintained site map.
To configure enhanced beacons:
1. Select Security > Enhanced Probe/Beacon Table from the main menu tree.
2. Select the Probe Table tab.
3. Select the Enable Enhanced Probe Table checkbox to allow an AP to forward MU probe requests
to the switch.
Enable all Select the Enable button (within the 802.11bg Radios field) to enable all the
802.11bg radios receive enhanced beacons.
Disable all Select the Disable button (within the 802.11bg Radios field) to disable all the
802.11bg radios from receiving enhanced beacons.