Installation guide

Switch Security
6-68
2. Click the Crypto Maps tab and select Interfaces.
3. Refer to the following read-only information displayed within the Interfaces tab.
4. Click the Assign Interface button to assign a Crypto Map to each interface through which IPSec
traffic flows.
Assigning the Crypto Map set to an interface instructs the security appliance to evaluate all the traffic
against the Crypto Map set and use the specified policy during connection or SA negotiation.
Assigning a Crypto Map to an interface also initializes run-time data structures (such as the SA
database and the security policy database). Reassigning a modified Crypto Map to the interface
resynchronizes the run-time data structures with the Crypto Map configuration. Also, adding new
peers through the new sequence numbers and reassigning the Crypto Map does not break existing
connections.
Name Lists the name of the Crypto Maps available for the interface.
Interface Name Displays the name of the interface through which IPSec traffic flows. Applying
the Crypto Map set to an interface instructs the switch to evaluate all the
interface's traffic against the Crypto Map set and to use the specified policy
during connection or security association negotiation on behalf of traffic
protected by crypto (either CET or IPSec).