Installation guide

Switch Security
6-56
2. Click the Remote tab.
3. Refer to the Configuration field to define the following:
4. Click the IP Range tab to view the following:
5. Click the Edit button (within the IP Range tab) to modify the range of existing IP addresses displayed.
6. Select an IP address range index and click the Delete button to remove this range from those
available within the IP Range tab.
DNS Server Enter the numerical IP address of the DNS Server used to route information to
the remote destination of the IPSec VPN.
WINS Server Enter the numerical IP address of the WINS Server used to route information
to the remote destination of the IPSec VPN.
Apply Click Apply to save any updates made to the screen.
Revert Click the Revert button to disregard changes and revert back to the last saved
configuration.
Index Enter the index assigned to the range of IP addresses displayed in the Starting
and Ending IP Address ranges. This index is used to differentiate the index
from others with similar IP addresses.
Starting IP Address Enter the numerical IP address used as the starting address for the range
defined. If the Ending IP address is left blank, only the starting address is used
for the remote destination.
Ending IP Address Enter a numerical IP address to complete the range. If the Ending IP address is
blank, only the starting address is used as the destination address.