Installation guide

Switch Security
6-54
5. Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel to close the dialog without committing updates to the running configuration.
6.8.1.2 Adding a New Transform Set
A transform set represents a combination of security protocols and algorithms. During the IPSec security
association negotiation, peers agree to use a particular transform set for protecting data flow. If the attributes
of an existing transform set no longer lend themselves useful, and an existing transform set is not required,
create a new transform set to meet the needs of your network.
To edit the attributes of an existing transform set:
1. Select Security > IPSec VPN from the main menu tree.
2. Click the Configuration tab.
3. Click the
Add button.
4. Define the following information as required for the new transform set.
Name Create a name describing this new transform set.
AH Authentication
Scheme
Select the Use AH checkbox to define the AH Transform Authentication
scheme. Options include:
• None - No AH authentication is used.
• AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication
algorithm.
• AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication
algorithm.