Installation guide

Switch Security
6-29
3. Click on the Add button.
4. Use the Interface drop-down menu to select the interface to configure on the switch. Available
options include – ge1, ge2, ge3, ge4, and VLAN1. As additional VLANs are created, they also become
available.
5. Use the IP ACL drop-down menu to select an IP ACL to attach to the L2 or L3 interface used in the
inbound direction.
6. Use the MAC ACL drop-down menu to select a MAC ACL to attach to a L2 interface used in the
inbound direction. A MAC ACL requires creation before it can be selected from this screen, if
necessary return to Configuring an ACL on page 6-22 and create a MAC ACL.
7. Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.