Installation guide

Switch Security
6-26
9. If the selected Protocol is tcp or udp, click the Protocol Options button to configure the source
and destination Port.
10. Use the Source Address field to enter the IP address from where the packets are sourced.
11. Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something is wrong in the transaction between the applet and the switch.
12. Click OK to use the changes to the running configuration and close the dialog.
13. Click Cancel to close the dialog without committing updates to the running configuration.
6.5.2.3 Editing an Existing Rule
As network and access permission requirements change, existing ACL rules need to be modified to be relevant
with new client access requests.
To modify an existing ACL rule:
1. Select Security > ACLs from the main menu tree.
2. Click on the Configuration tab.
3. Select an ACL from the ACLs field.
The rules associated with the selected ACL display in the Associated Rules section.
4. Click the Edit button within the Associated Rules field.
5. Use the Precedence field to modify the precedence (priority) value between 1 and 5000.