Installation guide

Switch Security
6-14
6.4 Configuring Wireless Filters
Use filters to either allow or deny a MAC address (or groups of MAC addresses) from associating with the
switch. Refer to the Wireless Filters screen to review the properties of existing switch filters. A filter can be
selected from those available and edited or deleted. Additionally, a new filter can be added if an existing filter
does not adequately express the MU’s address range required.
To display the Wireless Filters main page:
1. Select Security > Wireless Filters from the main menu tree.
2. The Wireless Filters tab is divided into 2 fields:
•Filters
• Associated WLANs
The Filters field contains the following read-only information:
MU-ACL Index Displays a numerical identifier used to associate a particular ACL
to a range of MAC addresses (or a single MAC address) either
allowed or denied access to the switch managed network.
Starting MAC Displays the beginning MAC Address (for this specific Index) either
allowed or denied access to the switch managed network.
Ending MAC Displays the ending MAC Address (for this specific Index) either
allowed or denied access to the switch managed network.
Allow/Deny States whether this particular ACL Index and MAC address range
has been allowed or denied access to the switch managed
network.