Installation guide

Switch Security
6-12
5. When using the Frames with known bad ESSIDs violation parameter it is necessary to enter a list
of known bad ESSIDs for the violation parameter. To enter this information, select Frames with
known bad ESSIDs and then click the Bad Essid Config button to launch a dialogue box where
bad ESSIDs can be added and removed.
6. Click on Apply button to save the configuration.
7. Click on Revert to rollback to the previous configuration.
6.3.2 Viewing Filtered MUs
Periodically check the Filtered MUs tab to review those MUs filtered by the switch for incurring a violation
based on the settings defined within the Configuration tab. Each MU listed can be deleted from the list or its
attributes exported to a user defined location.
To view status of those MUs filtered using the settings defined within the Configuration tab:
1. Select Security > Mobile Unit Intrusion Detection from the main tree menu.
2. Select the Filtered MUs tab.
The Filtered MUs tab displays the following read-only information for detected MUs:
NOTE If using the Frames with known bad ESSIDs violation parameter if no ESSIDs
are entered in the Bad Essid Config dialogue, this parameter will not function.
MAC Address Displays the MU’s MAC address. Refer to this address as the
potentially hostile MU’s identifier.
Radio Index The Radio Index displays the index of the radio detecting the MU
violation. Use this information to discern whether the detected MU
is known and whether it truly constitutes a threat.