Installation guide

Switch Security
6-9
4. The Number of Unapproved APs is simply the sum of all of Unapproved Radio MAC Addresses
detected.
5. If a Radio MAC address is listed incorrectly, highlight the Radio MAC Address and click the Allow
button.
Assign an Index and complete the required device address information to move the device into the
list of approved access point MAC addresses. The number of Unapproved APs updates accordingly
as devices are added and removed.
6. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
6.2.4 Unapproved APs (Reported by MUs)
Use the Unapproved APs (Reported by MUs) tab to review unapproved access points detected by
associated MUs. The criteria for access point approval was defined using the Security > Access Port
Intrusion Detection > Configuration screen, using the values defined within the MU Assisted Scan field.
To view MU detected unapproved access points:
1. Select Security > Access Port Detection from the main menu tree.
2. Click on the Unapproved APs (Reported by MUs) tab.
Last Seen (In Seconds) Displays the time (in seconds) the Unapproved AP was last seen on
the network by the detecting AP.
ESSID Displays the ESSID of each Unapproved AP. These ESSIDs are
device ESSIDs observed on the network, but have yet to be added
to the list of Approved APs and are therefore interpreted as a
threat. If an ESSID displays on the list incorrectly, click the Allow
button and add the ESSID to a new Allowed AP index.