Installation guide

Switch Services
5-63
The Enabled column displays a green checkmark next to the SOLE adapter once enabled. A Red X
defines the adapter as disabled.
3. Click the Disable button to disable a selected SOLE adapter. The Enable column displays a red X next
to the SOLE adapter once disabled.
5.8.2 Viewing SOLE Adapters
Periodically review the SOLE Adapters tab to assess the adapters available to the switch. To review available
SOLE adapters:
1. Select Services > SOLE from the main menu tree.
2. Select the SOLE Adapters tab.
3. Review the following to ascertain the SOLE adapters seen by the switch:
NOTE In order to set the listening MAC in each radio you must use the radio command in
the switch’s Command Line Interface (CLI). An example of the command syntax is:.
#radio <1-n> tag-type aeroscout listen-addr 01-0c-cc-00-00-00
Type Displays the configuration type for each SOLE adapter. Currently,
the only supported type is Aeroscout.
Version Displays the version number of the SOLE adapter.
Build Date Displays the SOLE adapter build date and time.