Installation guide

Switch Services
5-61
3. Refer to the following within the Recently Found Devices tab to discern whether a located device
should be deleted from the list or selected to have its Web UI launched and its current configuration
modified.
4. If a discovered switch is of no interest, select it from amongst the discovered devices displayed and
click the Delete button.
Once removed, the located device cannot be selected and its Web UI displayed.
5. Select a discovered device from amongst those located and displayed within the Recently Found
Devices screen and click the Launch button to display the Web UI for that switch.
IP Address Displays the IP address of the discovered switch. This IP address
obviously falls within the range of IP addresses specified for the
discovery profile used for the device search. If the IP addresses
displayed do not meet your search expectations, consider creating
a new discovery profile and launching a new search.
Software Version Displays the software version running on the discovered device.
Product Displays the name of the device discovered by the device search. If
the list of devices discovered is unsatisfactory, consider
configuring a new discovery policy and launching a new search.
Redundancy Group Id If the discovered device is part of a cluster (redundancy group), its
cluster ID displays within this column. The Redundancy ID would
have been assigned using the Switch > Redundancy screen.
Device Name Displays the device name assigned to the discovered device. This
name would have been assigned using the Switch > Configuration
screen.
Device Location Displays the device location defined to the discovered device. The
location would have been assigned using the
Switch > Configuration screen.
Profile used for
Discovery
Displays the profile selected from within the Discovery Profiles tab
and used with the Start Discovery function to discover devices
within the switch managed network. If the group of devices
discovered and displayed within the Recently Found Devices tab
does not represent the device demographic needed, consider going
back to the Discovery Profiles tab and selected a different profile
for the switch discovery process.
CAUTION When launching the Web UI of a discovered device, take care not to make
configuration changes rendering the device ineffective in respect to its current
configuration.
!