Installation guide

Switch Services
5-60
4. Refer to the Status field for an update of the edit process.
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
5. Click OK to save the changes to the running configuration and close the dialog.
6. Click Cancel to close the dialog without committing updates to the running configuration.
5.7.2 Viewing Recently Found Devices
Refer to the Recently Found Devices tab to view a table of devices found by the discovery process. Each
discovered device compatible with the locating switch (running switch software version 1.1 or higher) is
displayed in a shaded color to distinguish it from non-compatible devices. The switch Web UI enables users
display the Web UI of the discovered device in a separate browser window.
To view the devices located by the switch:
1. Select Services > Discovery from the main menu tree.
2. Select the Recently Found Devices tab.
SNMP Version Use the drop-down menu to define the SNMP version (either v2 or
v3) used for discovering available network devices.