Installation guide

Switch Services
5-44
Status Displays the current status of this group member. This status could
have the following values:
• Configured - The member is configured on the current
wireless service module.
• Seen - Heartbeats can be exchanged between the
current switch and this member.
• Invalid - Critical redundancy configuration parameter(s)
of the peer (heartbeat time, discovery time, hold time,
Redundancy ID, Redundancy Protocol version of this
member) do not match this switch’s parameters.
• Not Seen - The member is no more seen by this switch.
• Established - The member is fully established with this
current module and licensing information already been
exchanged between this switch and the member.
Adoption Count Displays the number of access ports adopted by this member.
Adoption Capacity Displays the maximum number of access ports the member is
licensed to adopt. For information on licensing rules impacting
redundancy group members, see
Redundancy Group License Aggregation Rules on page 5-45.
Mode The Redundancy Mode could be Active or Standby depending on
the mode configuration on the member. Refer to the Configuration
screen to change the mode
License Count Displays the number of port licenses available for this switch. For
information on licensing rules impacting redundancy group
members, see
Redundancy Group License Aggregation Rules on page 5-45.
Image Version Displays the image version currently running on this member. Is the
selected version complimentary with this switch’s version?
First Seen Displays the time this member was first seen by the switch.
Last Seen Displays the time this member was last seen by the switch.
HB Sent Displays the number of heartbeats sent from the switch to this
member since the last reboot of the switch.
HB Received Displays the number of heartbeats received by the switch since the
last reboot.
Updates Sent Displays the number of updates sent from the switch since the last
reboot. Updates include, authorization level, group authorization
level and number of access ports adopted.
Updates Received Displays the number of updates received by the current switch from
this member since the last reboot.
Radio Portals Displays the number of radio portals detected on each redundancy
member listed.
Associated MUs Display the number of MUs associated with each member listed.
Rogue APs Displays the number of Rogue APs detected by each member. Use
this information to discern whether these radios represent
legitimate threats to other members of the redundancy group.