Installation guide

Switch Services
5-39
3. Refer to the History field to view the current state of the redundancy group.
4. Click Apply to save any changes to the screen. Navigating away from the screen without clicking the
Apply button results in all the changes on the screen being discarded.
5. Click the Revert button to undo the changes to the screen and revert to the last saved configuration.
5.4.1 Reviewing Redundancy Status
The switch is capable of displaying the status of the cluster membership. Use this information to assess the
overall health and performance of the group.
To configure switch redundancy memberships:
1. Select Services > Redundancy from the main menu tree.
2. Select the Status tab.
State Displays the new state (status) of the redundancy group after a
Trigger event.
Time Displays the Timestamp (time zone specific) when the state change
occurred.
Trigger Displays the event causing the redundancy group state change on
the switch.
Description Displays a redundancy event description defining the redundancy
group state change on the switch. Typical states include
Redundancy Disabled or Redundancy Enabled.